Air-slide-fabric CSM China >> News >> Air Slide Pneumatic Conveyor Systems & Air Slide Fabric

Air Slide Pneumatic Conveyor Systems & Air Slide Fabric

Air slide canvas

Air slide canvas

Choose the specifications:250mm 270mm 480mm 580mm

the specifications between 10mm to 1600mm can be produced at any time according to user needs; more than 1600mm of special specifications to be agreed in advance.

Air Slide Pneumatic Conveyor Systems & Air Slide Fabric

Description

The Air slide pneumatic conveyor systems refers to equipment for horizontally conveying dry powdery materials (such as cement and raw materials in cement enterprises). It consists of a number of slots made of thin steel and is arranged at a certain slope along its conveying direction. A gas permeable layer is sandwiched between the upper and lower casings of the trough.

Instructions

The high-end of the conveying material is fed into the upper casing, and the compressed air is blown into the lower casing by a special blower, and is distributed between the material particles through the gas permeable layer of the dense pores, so that the material undergoes so-called gasification to change the friction angle of the material. In order to form a flow state, it descends along the slope to achieve the purpose of transportation.

air slide fabric
air slide fabric

Advantage

Because the air chute has no transmission parts in the conveying material, it has less wear, easier maintenance, less power consumption, less material consumption, no noise, and airtight than the belt conveyor, screw conveyor and buried scraper conveyor. Good, simple structure, safe and reliable operation, and easy to change the conveying direction and multi-point feeding and unloading. Therefore, it has been adopted by many companies in recent years.

Air slide fabric in cement plant:

An Air slide belt (Air slide fabric) is in the middle of a chute.

Powder material will come into the chute above Airslide fabric. Material will flow to the chute lower side as pneumatic blower down Air slide belt.

That's why we say Airslide belt can move powder material because of the wind power.

And then, the rest wind will go out from the top of the chute. Through the moving, no parts moved except powder material. So that it can spare more energy and maintain cost, etc.

Our Air slide canvas is installed on the surface of the silo bottom. It is supplied for installation as aeration units on the sloped conical bottoms of bins and silos to aid in the withdrawal of dry relatively free-flowing material.

Each Air slide aeration unit package consists of 200mm open-type. Airslide conveyor units in lengths of 1.5 or 3m depend on the slope length of the conical storage area. Some spoke patterns are normally used with materials which have good fluidization characteristics. Others spoke patterns provide maximum aeration for difficult materials which can be fluidized.

Our Air slide fabrics can be used at temperatures between -60°C and +150°C. The air slide fabrics are made from polyester yarns. We are also, however, able to weave fabrics to our customers' specific demands for air permeability and mechanical strength.

air slide fabric

广告位招租,广告代号:-feedback

Airslide Fabric

Air slide fabrics are used for the pneumatic conveying of fine dry powdery products such as cement. The air slide cloth divides the air slide into upper and lower chambers. The chamber is inclined at as low as 1.5°.Compressed air is injected into the lower chamber which then goes through the media and “fluidises” the cement powder. The cement then behaves like a fluid and “flows” down the length of the chamber.

TIPS

Airslide is a semi-permeable textile cloth which allows air to pass through but not the products.

Airslide Fabrics other names are: airslide fabric,air slide fabric,air permeable fabric,fluidising fabric,fluidizing fabric,air slide belt,air slide canvas,aeroslide,airslide membrane,aeration pad, aeration fabric.air slide fabric in shipping,air slide fabric for silos,chute bottoms.


 

Contact us

China Sunrise Machinery(CSM)
Haitian International, East Street, Haian County, Jiangsu Province, China

Tel:       +86-513-88820117
Fax:      +86-513-88812117
E-mail:[email protected]


 

©2016 CSM MACHINE